Continuous Electronic Ignition Problems for Kenmore Outdoor Grill Model Rb2818tn

Kenmore Igniter Components

Electrode and wire for some Kenmore grills. Includes mounting bolt and nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center). Includes an extra 16� connector wire with flat female spade end and male spade end for some applications (not shown in photo).

Part Number: 00162
Material: ceramic
Weight: 0.1

Electrode and wire for some Kenmore grills. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

Part Number: 00163
Dimensions: 3 1/4� x 1 1/4�
Material: ceramic
Weight: 0.1

Replacement electrode for some Kenmore grills.

Ceramic insulator
25� wire with female spade connector
Locking nuts.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01190
Material: ceramic
Weight: 0.2

Electrode, gas collector box, and wire for some Kenmore grills. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part#

03100

and

03120

, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part#

03199C

to convert the electrode wire from a femal spade connector to a female round connector.

Part Number: 01472
Material: ceramic
Weight: 0.1

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Kenmore grills.

Part Number: 02615
Dimensions: 4 3/4
Material: stainless steel
Weight: 0.3

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Kenmore grills.

Part Number: 02616
Dimensions: 3 5/8� x 4 5/16�
Material: stainless steel
Weight: 0.3

Igniter collector box, ceramic electrode with male spade connector for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02617
Dimensions: 5 1/2
Material: stainless steel
Weight: 0.3

Igniter collector box, ceramic electrode with male spade connector, and mounting plate for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02618
Dimensions: 4
Material: stainless steel
Weight: 0.3

Ignitor collector box with ceramic electrode and male round connector for some Kenmore grills.

Wire not included.
Designed to connect to wires with round female connector.
If used with existing wire, confirm connector type is round where wire connects to electrode.
Commonly used with wire part# 03400.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02623
Material: ceramic
Weight: 0.2

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Kenmore grills.

Part Number: 02633
Dimensions: 3 15/16� x 1 5/8�
Material: ceramic
Weight: 0.10

Electrode, collector box with connector wire that has a female spade end for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03080
Material: ceramic
Weight: 0.05

Push-Button self-grounding piezo spark generator for some Kenmore grills. Has round male connector, so connecting wire needs to be female round connector. If needed, see part#

03199C

for a short adapter wire that converts flat female spade connectors to female round. For more information, see our help center article Ignition 101.

Part Number: 03100
Weight: 0.1

Electrode assembly for some Kenmore grills. Includes:

Ceramic electrode
Gas collector box
40� connector wire with female spade connector
Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03118
Material: ceramic
Weight: 0.2

Push-Button self-grounding piezo spark generator; requiers 3/4� mounting hole for some Kenmore grills. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part#

03199C

for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#

03620

. For more information, see our article Ignition 101.

Part Number: 03120
Weight: 0.1

Ignition module switch for spark generators that accept wired remote (button) trigger switches for some Kenmore grills. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

Push-button ignition module switch with two male spade connectors on back
Two 20� wires with female spade connectors
One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4� x 1�
Weight: 0.1

Universal 5 1/2� jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some Kenmore grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Universal 2 5/8� adapter wire with female round and male spade connectors for some Kenmore grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

Can change male round to male spade
Can change female spade to female round

ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

Universal 2 3/4� adaptor wire with a round female end and a male spade end that has a protective cover for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal battery powered push button ignitor for some Kenmore grills.

1.5 volt
Has one (1) terminal (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4� mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03310
Weight: 0.3

Universal volt battery powered push button ignitor for some Kenmore grills.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4� mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03320
Weight: 0.3

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger for some Kenmore grills.

1.5 volt
Has two (2) spark outlets (male spade connector)
Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8� mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03322
Dimensions: 2 5/8� x 2�
Weight: 0.5

Universal battery powered push button ignitor for some Kenmore grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4� mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03330
Weight: 0.5

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger for some Kenmore grills.

1.5 volt
Has three (3) spark outlets (male spade connector)
Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8� mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03332
Dimensions: 2 5/8� x 2 5/8�
Weight: 0.3

Universal three-outlet battery powered push button ignitor for some Kenmore grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8� mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16� x 2�
Weight: 0.5

Universal battery powered push button ignitor for some Kenmore grills.

1.5 volt
Has (5) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4� mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03335
Dimensions: 2 5/8� x 2�
Weight: 0.3

Universal four-outlet battery powered push button ignitor for some Kenmore grills.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8� mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

Small AA battery powered push button spark generator for some Kenmore grills.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8� mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger for some Kenmore grills.

1.5 volt
Has four(4) spark outlets (male spade connector)
Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8� mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03344
Dimensions: 2� x 2 1/2�
Weight: 0.5

Universal battery powered push button ignitor for some Kenmore grills.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8� mounting hole
Overall dimensions: 2� x 3 3/8� x 3�
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

Burner mounted replacement electrode for use with burner 15641 for some Kenmore grills.

Ceramic insulator
Wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03351
Material: ceramic
Weight: 0.2

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch for some Kenmore grills.

Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part

03621

. Inspect your system.

1.5 volt
Has five (5) spark outlets (male spade connector)
Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8� mounting hole
Overall dimensions: 2� x 3 3/8� x 2 5/8�

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03352
Dimensions: 3 3/8� x 2�
Weight: 0.7

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger for some Kenmore grills.

1.5 volt
Has six (6) spark outlets (male spade connector)
Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8� mounting hole
Overall dimensions: 2� x 3 3/8� x 2 5/8�

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03356
Dimensions: 3 3/8� x 2�
Weight: 0.7

Universal battery powered push button ignitor for some Kenmore grills.

1.5 volt
Has five (5) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8� mounting hole
Overall dimensions: 2� x 3 3/8� x 3�
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16� x 2�
Weight: 0.7

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger for some Kenmore grills.

1.5 volt
Has seven (7) spark outlets (male spade connector)
Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8� mounting hole
Overall dimensions: 2� x 3 3/8� x 2 5/8�

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03387
Dimensions: 3 3/8� x 2�
Weight: 0.5

25� wire with female spade connector on one end, and female round connector on the other end for some Kenmore grills. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

20� wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors) for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03500
Weight: 0.05

47� wire with female spade connector and square plastic connectors for some Kenmore grills. Used with battery powered spark generators.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14� ground wire with female spade connector and eye connectors for some Kenmore grills. For use with 1.5 volt spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator for some Kenmore grills. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8� x 1 1/8�
Weight: 0.1

ceramic electrode with bendable wire, mounting bracket, and male spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Kenmore grills.

Part Number: 03700
Material: ceramic
Weight: 0.1

20� Ignitor adapter wire with female spade connector and male round connector for some Kenmore grills. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Collector box and electrode assembly for some Kenmore grills. Tongue style burner mounted collector box with ceramic electrode, 15� wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03900
Material: ceramic
Weight: 0.2

Burner mounted electrode for some Kenmore grills. Mounts to flange on underside of burner.

Ceramic insulator
Mounting bracket with nut and bolt
Male spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04010
Material: ceramic
Weight: 0.05

Burner mounted electrode for some Kenmore grills. Used with burners 10221 and 16231 and other similar burners and wire 03610.

Ceramic insulator
Mounting bracket with nut and bolt
Male spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04022
Material: ceramic
Weight: 0.1

Electrode kit for some Kenmore grills.

Mounting bracket
Electrode with ceramic insulator
Wire with round connector
Protective sleeve

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04300
Material: ceramic
Weight: 0.1

Ignitor electrode and collector box assembly for some Kenmore grills. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:

Gas collector box
Ceramic electrode and connecting wire with male round connector
Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04400R
Weight: 0.3

Ceramic electrode with male spade connector and mounting bracket for Kenmore models with U-shaped burners for some Kenmore grills. Attaches directly to burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04410
Material: ceramic
Weight: .05

Collector box and ceramic electrode with male spade connector for models with 12112 or 11512 burners for some Kenmore grills. Attaches directly to burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04420
Material: ceramic
Weight: 0.1

Ceramic electrode and 39� wire with female spade connector for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04423
Material: ceramic
Weight: 0.2

Burner mounted electrode for use with 15591 and 15491 burners for some Kenmore grills.

39� wire with female spade connector
Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430
Material: ceramic
Weight: 0.1

Electrode with 25� wire that has a female spade/flat end for some Kenmore grills. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04431
Dimensions: 4 3/4� x 4 1/2�
Material: ceramic
Weight: 0.1

Electrode with 24 for some Kenmore grills.5� wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04432
Dimensions: 4�
Material: ceramic
Weight: 0.1

electrode assembly for use with Weber models with spark generators that have an external grounding prong for some Kenmore grills. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

OEM style collector box for some Kenmore grills.

Bolts onto burner with venturi
Used with burners 11502, 15102, 15202, and 15402
Use original electrode; replacement electrode # 04510 has been discontinued

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 05152
Material: stainless steel
Weight: 0.1

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Kenmore grills.

Part Number: 05223
Material: ceramic
Weight: 0.1

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Kenmore grills.

Part Number: 07304
Material: ceramic
Weight: 0.1

Push button igniter for some Kenmore grills. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-21
Weight: 0.05

Gas collector box
Ceramic electrode and wire
Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-11B
Weight: 0.3

Ceramic electrode for use with CBP1-CI cast iron burner for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-24B
Weight: 0.3

Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-28B
Weight: 0.2

46� Wire with female spade connectors and square plastic connectors for some Kenmore grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Tongue style collector box for burner mounted applications for some Kenmore grills. Includes preinstalled electrode with round female connector end and 20� wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Battery powered push button igniter for some Kenmore grills.

Has two (2) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4� or 13/16� mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB2-B
Weight: 0.3

Battery powered push button igniter for some Kenmore grills.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4� or 13/16� mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

Replacement battery powered ignitor/spark generator and ground wire; has 4 outlets and two larger outlets: one for a ground wire, included, and one for the old remote switch wire, not included for some Kenmore grills. Uses AA battery, not included, and requires 7/8� mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: P02502184C-R
Weight: 0.55

Image not available

Genuine OEM snap-on electrode, wire, and collector box assembly for some Kenmore grills.

Note: This part does not fit our after-market burners such as 19002.

This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: SP5016-20
Weight: 0.05

IGNITOR CLIP ASSY 2 WIRE H BURNER

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Kenmore grills.

Part Number: SP5017-20
Weight: 0.3

ELECTRODE CLIP-ON

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Kenmore grills.

Part Number: SP9A-20
Weight: 0.4

Push-button electronic igniter with two (2) spade connectors for some Kenmore grills. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

Push-button electronic igniter with three (3) spade connectors for some Kenmore grills. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8� mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

$37.10
$14.99

Push-button electronic igniter with four (4) spade connectors for some Kenmore grills. Black cap. Uses one AAA battery (not included). Requires a 3/4� mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

Universal 3 outlet rotary spark generator for some Kenmore grills. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

provenzanoworlse.blogspot.com

Source: https://www.clagrills.com/allgrillparts/kenmore/kenmore-all-igniters.htm

Continuous Electronic Ignition Problems for Kenmore Outdoor Grill Model Rb2818tn

Kenmore Igniter Components

0 Response to "Continuous Electronic Ignition Problems for Kenmore Outdoor Grill Model Rb2818tn"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel

Part# SP9A-20 fits these 1 Kenmore models:
10629